Now your customer can add their own custom message to any email notification. The use could be a general note or message, or possibly a list of instructions listing the proper action to take. Each person notified can have their own message.

Notification Edit Screenshot
Example of Email Notification: (Custom Message appears after the timestamp)
Subject: Event from Office Building
Alarm: Supervisory Zone:5 Water Alarm
1-28-14 10:25 AM
Call the plumber, 800-555-1212
Example of Email Notification: (Custom Message appears after the user)
Subject: Event from Hospital
Command: System Lockdown Command [ ER Panel @ Hospital ]
1-28-14 10:25 AM
User: Joe Smith
Use caution while onsite.
A lockdown was initiated and your access may be denied until the situation is contained.
January 7, 2013
Quick & Easy Technician Testing
SmartTest
TM is an easy new way for technicians to test and control system points, (zones, doors, areas, & outputs), on their smart phone. How many times have you been working on a zone at a far point of the building, on a lift, at a splice in the attic, etc. and wished you had someone at the keypad relaying the status. Now you can have that convenience without needing a second tech. Just use the newSmartTest
TM feature from your smartphone and watch the status of the zones ...
[Read More]
September 12, 2012
ELK M1 fully integrated with Connect ONE
The ELK M1 is a flexible security, access control, and automation panel. It allows not only security and access control but also interfaces to hvac thermostats, lighting, and door locks. The interfaces can be wired or wireless, such as z-wave or Radio RA. Your customers can now control all of these devices right from their Connect ONE interface, ELK also provides a sleek touchscreen for convenient control. The ELK M1XEP ethernet module is required and a special firmware must be loaded, firmware available free of charge via download from ELK.
Integration Capabilities
...
[Read More]