Feature Blog

January 28, 2020

Send Any Command with Delay Parameter [Show All]

Now ANY command from the Monitor screens can be sent with a delayed action. Previously commands could only be sent with a delay when configured within a Task Rule.  When selecting the command(s) to send there is a clock icon next to the Send Commands button at the bottom of the screen.  Pressing it will give the options shown below which allow your customer to selectively add a delay parameter before the command will actually process to the system(s).  A good example of this is for a timed unlock of a door.  You could issue the unlock command now and then issue a lock command with a delay of one hour.  This will ensure you do not forget to lock the door later since you already told Connect ONE to issue the lock command for you in one hour.